Explore our structural steel pallet shelving systems manufactured under strict ISO 9001, CE, and FEM 10.2.02 quality management benchmarks.
When engineering high-bay warehouse infrastructure, material yield strength and profile geometry dictate overall safety factor ratios ($FOS \ge 1.5$). As a tier-1 OEM/ODM warehouse pallet shelving systems manufacturer, our manufacturing processes prioritize high-grade cold-rolled structural steel (Q235B and Q355B structural grade compliant with GB/T 700 and EN 10025 specs).
Our structural designs are verified via Finite Element Analysis (FEA) under dynamic load conditions, ensuring strict alignment with standard specifications including FEM 10.2.02 (European Federation of Materials Handling), RMI (Rack Manufacturers Institute MH16.1), and ABNT NBR 15524 standards for lateral displacement tolerance and seismic resilience.
| Steel Grade Spec | Yield Strength ($R_{eH}$) | Tensile Strength ($R_m$) | Deflection Limit ($\delta$) | Recommended Industry Application |
|---|---|---|---|---|
| Q235B Cold-Rolled | $\ge 235\text{ MPa}$ | $370 - 500\text{ MPa}$ | $L / 200$ | Standard Selective Racking, Longspan Shelving |
| Q355B High-Tensile | $\ge 355\text{ MPa}$ | $470 - 630\text{ MPa}$ | $L / 300$ | High-Bay VNA, AS/RS System Uprights, Heavy Cantilever |
| Pre-Galvanized Coil | $\ge 275\text{ MPa}$ | $360 - 510\text{ MPa}$ | $L / 250$ | Cold Storage (-30°C), Humid Environments, Outdoor Shelving |
To eliminate surface degradation caused by humidity, chemical fumes, or abrasive mechanical wear during forklift operation, our rack profiles undergo a 7-stage pre-treatment wash (degreasing, phosphating, pure water rinsing) prior to applying an electrostatic thermosetting epoxy-polyester powder coating (thickness: $60-90\,\mu\text{m}$). For aggressive environments, such as marine port warehouses or cold-chain distribution centers, we offer full Hot-Dip Galvanizing (HDG) per ASTM A123 / EN ISO 1461 standards, ensuring over 30 years of corrosion resistance.
We provide end-to-end turnkey OEM/ODM services from CAD floorplan optimization to physical stress testing and overseas shipping.
Roll-formed upright profiles ranging from 80mm to 140mm width and 1.5mm to 3.0mm thickness with teardrop, Omega, or diamond hole patterns for seamless beam engagement.
Integrated structural calculation models factoring in local seismic zone acceleration ($S_d$) and wind load pressures for high-bay outdoor rack-clad buildings.
Millimeter-precise tolerance control ($\pm 0.5\text{ mm}$) engineered specifically for stacker crane guidance and Automated Guided Vehicles (AGVs/AMRs).
As logistics operations transition toward industry 4.0, warehouse storage infrastructure is shifting from static steel frames to dynamic, automated, and ecologically compliant assets. Enterprise procurement teams must evaluate the following three macro trends:
With industrial real estate lease rates rising globally, standard 3.5-meter forklift aisles are increasingly converted into Very Narrow Aisle (VNA) systems (1.6m–1.8m width) or dense Drive-In / Radio Shuttle setups. Future-proof pallet racking systems must feature flexible pitch configurations (50mm or 75mm beam adjustment) to accommodate fluctuating SKU dimensions without sacrificing structural load capacity.
Global supply chain mandates require manufacturers to quantify Scope 3 embedded carbon emissions. We are integrating Electric Arc Furnace (EAF) low-carbon steel coils into our OEM production lines, reducing embodied carbon by up to 45% compared to blast-furnace routes. Powder coatings are formulated with zero-VOC thermosetting resins, supporting LEED and BREEAM building certifications.
Modern mega-fulfillment centers are beginning to implement IoT strain gauges and collision sensors embedded within rack upright bases. These real-time telemetry systems alert warehouse management software (WMS) of structural impact damage caused by material handling equipment before critical buckling failures occur.
Upload your warehouse floor plan (DWG/PDF), pallet weights, and clear height dimensions. Our structural engineers will return a complete 2D/3D layout design and stress calculation report within 24 hours.
Send an InquiryAnswers to critical structural engineering, regulatory compliance, and international logistics questions frequently raised by global wholesale buyers.
Beam load capacity is calculated based on uniform distributed load (UDL) principles according to FEM 10.2.02. Deflection is strictly capped at maximum $\delta \le L/200$ of the beam span (e.g., for a 2700mm beam, max center deflection is 13.5mm under full rated load). Every beam pair is fitted with safety locking pins that resist vertical uplift forces of at least 500 kg per connector.
Yes. We customize frame depths and beam lengths specifically for target pallet dimensions: PBR pallets (1000 × 1200 mm), Europallets (800 × 1200 mm, EUR 1), or US standard pallets (40 × 48 inches). Frame depths are typically configured to 1000mm or 1100mm to allow a standard 50mm front and rear pallet overhang for safe forklift placement.
Every OEM/ODM shipment includes factory mill test certificates (MTC) verifying raw material chemical and mechanical properties, ISO 9001 quality audit reports, CE declaration of conformity, and structural load tables compliant with RMI, FEM 10.2.02, and ANSI MH16.1 specifications.
Q355B features a yield strength approximately 50% higher than Q235B (355 MPa vs 235 MPa). Utilizing Q355B allows us to reduce raw material profile wall thickness while maintaining identical load-bearing performance, lowering total shipping weight, container freight costs, and structural building dead load for high-bay projects.
Uprights and beams are bundled using high-tensile PET strapping, protected with corner edge protectors, and wrapped in heavy-duty stretch film. Small hardware components (baseplates, row spacers, bolts, safety pins) are packed in reinforced wooden crates or heavy-gauge corrugated boxes on pallets for easy un-stuffing with forklifts.
Standard production time for standard colors (RAL 5017 Blue / RAL 2004 Orange) is 15 to 25 calendar days following final CAD drawing sign-off. Customized profiles or non-standard powder coat colors require 25 to 35 days. Fast-track production lines are available for urgent logistics park contracts.
Operating under our main production site (Guangdong Orbit Metal Products Co., Ltd.), our facility spans over 35,000 square meters equipped with 16 automated cold-roll forming lines, high-precision robotic welding stations, and an automated continuous powder coating line.
| Manufacturing Department | Equipment / Infrastructure | Monthly Output Capacity | Precision Tolerance Standard |
|---|---|---|---|
| Roll-Forming Division | 16 Continuous CNC Roll-Formers | 4,500 Metric Tons | $\pm 0.3\text{ mm}$ Profile Straightness |
| Robotic Welding Center | 12 OTC Robotic Welding Units | 60,000 Beam Assemblies | AWS D1.1 Structural Weld Spec |
| Powder Coating Line | Swiss Gema Automatic Spray Booth | 350,000 Square Meters | ISO 2409 Cross-Hatch Adhesion Class 0 |
| Quality Control Lab | Universal Tensile & Salt-Spray Testing | 100% Batch Inspection | GB/T 10125 Salt-Spray $> 500\text{ hours}$ |
We routinely execute FOB, CIF, DDP, and DAP shipments to major global commercial hubs including Santos, Paranaguá, Itajaí, Hamburg, Rotterdam, Los Angeles, and Dubai. Our logistics department coordinates complete export documentation including Certificates of Origin (Form E, Form F, CO), Customs Classification tariff codes (HS Code: 7308.90.00), and container loading density optimization to maximize space per 40ft High-Cube container.
Boost floor space efficiency, ensure structural safety compliance, and access factory-direct wholesale pricing today.
Send an Inquiry